Scorpion™ GBC User Manual
13
12/17/2009 10:50 AM
4.
O
PERATING
I
NSTRUCTIONS
Navigating the Control Panel
Access control panel functions using the four panel buttons located directly underneath the LED
Display.
The Control Panel LED Display shows the menu items you select from the menu map. When a menu
function is selected, the display will show immediately the first available option for the selected menu
function. To select a menu item, press
<ENT>
.
Use
<UP>
and
<DOWN>
to navigate the menu map and menu options. Press
<ENT>
to access the
menu function currently displayed or to enable a menu option. To return to the previous option or
menu without changing the value, press
<MODE>
.
DMX Operation
This is the operating mode which will allow for control with an external DMX controller. You
must set the starting address for this mode. If this is your first time using DMX, then it is
recommended that you refer to the “DMX Primer” section in the “Appendix” of this manual.
When operating in DMX receiving mode, the display will blink at a constant rate in
the absence of DMX signal.
Use the following procedure for setting the fixture to DMX operation.
1.
Press
<MODE>
repeatedly until a number from
001~512
appears on the LED
display.
2.
Use
<UP>
and
<DOWN>
to select the DMX starting address.
3.
Press
<ENT>
.
Button
Function
<MODE>
Used to access the menu or to return to a
previous menu option
<UP>
Scrolls through menu options in ascending
order
<DOWN>
Scrolls through menu options in descending
order
<ENT>
Used to select and store the current menu
or option within a menu
MODE
UP
DOWN
ENT
