Rogue™ R1 Wash QRG
EN
3
Power Linking
You can link up to 10 Rogue™ R1 Wash products at 120 V, 18 products at 208 V,
or 21 products at 230 V. Never exceed this number. Power linking cords can be
purchased separately.
AC Plug
Connection
Wire (U.S.)
Wire (Europe)
Screw Color
AC Live
Black
Brown
Yellow/Brass
AC Neutral
White
Blue
Silver
AC Ground
Green/Yellow
Green/Yellow
Green
Replacing The Fuse
1.
Disconnect this product from power.
2.
Using a flat head screwdriver, unscrew the fuse holder cap from the housing.
3.
Remove blown fuse and replace with a good fuse of the same type and rating.
4.
Screw the fuse holder cap back in place and reconnect power.
DMX Linking
The Rogue™ R1 Wash will work with a DMX controller using
a 3- or 5-pin DMX serial connection. A DMX Primer is available from
www.chauvetprofessional.com
.
DMX Connection
The Rogue™ R1 Wash uses a 3- or 5-pin DMX data connection for its DMX
personalities:
14CH
,
15CH
,
19CH
, and
21CH
. See the User Manual for
information about connecting and configuring the product for DMX operation.
Mounting
Before mounting this product, read the
Safety Notes
. Use at least one
mounting point per product. Make sure the mounting clamps
(such as TRUSST® clamps from Chauvet) are capable of supporting the weight
of the product. For our Chauvet line of mounting clamps, go to
www.trusst.com/productcategory/accessories-clamps/
.
Product
Mounting
Diagram
When using only one mounting clamp, be sure to use a clamp with a captive
bolt to prevent accidental loosening.
Overhead Mounting
Floor Mounting
Mounting Clamp
Safety Cable