background image

 
Edition Notes

 

Rogue™ R1 Beam User Manual Rev. 2 

Edition 

Notes 

The  Rogue™ R1 Beam  User Manual Rev. 2  covers the description, safety precautions, 
installation, programming, operation, and maintenance of the Rogue™ R1 Beam. CHAUVET® 
released this edition of the Rogue™ R1 Beam User Manual in June 2014. 

Trademarks 

CHAUVET® is a registered trademark of CHAUVET & Sons Inc. (d/b/a CHAUVET® or 
Chauvet). The CHAUVET® logo in its entirety including the CHAUVET® name and the dotted 
triangle, and all other trademarks in this manual pertaining to services, products, or marketing 
statements  are owned or licensed by CHAUVET®. Any other product names, logos, brands, 
company names, and other trademarks featured or referred to within this document are the 
property of their respective trademark holders. 

Copyright Notice 

CHAUVET® owns the content of this User Manual in its  entirety, including but not limited to 
pictures, logos, trademarks, and resources. 

© Copyright 2014 CHAUVET®. All rights reserved. 

Electronically published by CHAUVET® in the United States of America. 

Manual Use 

CHAUVET® authorizes its customers to download and print this manual for professional 
information purposes only. CHAUVET® expressly prohibits the usage, copy, storage, 
distribution, modification, or printing of this manual or its content for any other purpose without 
written consent from CHAUVET®.  

Document 

Printing 

For better results, print this document in color, on letter size paper (8.5 x 11 in), double-sided. If 
using A4 paper (210 x 297 mm), configure your printer to scale the content accordingly. 

Intended 

Audience 

Any person in charge of installing, operating, and/or maintaining this product should completely 
read through the guide that shipped with the product, as well as this manual, before installing, 
operating, or maintaining this product. 

Disclaimer 

CHAUVET® believes that the information contained in this manual is accurate in all respects. 
However, CHAUVET® assumes no responsibility for any errors or omissions in this document. 
CHAUVET®  reserves the right to revise and make changes to the content of this document 
without obligation that CHAUVET® notify any person or company of such revision or changes. 
This does not in any way constitute a commitment by CHAUVET®  to make such changes. 
CHAUVET® may issue a revision of this manual or a new edition to incorporate such changes. 

Document 

Revision 

The  Rogue™ R1 Beam  User Manual Rev. 2  supersedes all previous versions of this manual. 
Discard any older versions of this manual and replace with this version. Go to 

www.chauvetprofessional.com

 for the latest version. 

 

Author 

Date 

Editor 

Date 

D. Couppe 

6/4/14 

A. Leon 

6/4/14 

 

 
 

Summary of Contents for Rogue R1 Beam


































Reviews: