Q-Wash 360Z-LED QRG
Page 3 of 8
Features
•
11 or 15-channel RGBW LED moving yoke wash fixture
•
Pan: 540
°
•
Tilt: 270
°
•
RGBW color static mixing with or without DMX control
•
Vector speed channel for RGBW color mixing
•
Variable zoom
•
Variable electronic strobe
•
Continuously variable electronic dimmer (0~100%)
•
Built-in automated programs
•
Remote fixture reset and vector speed channel
•
255-step fully customizable program
•
Recall auto or custom programs via control panel or DMX
•
Color temperature presets (3,200~10,000 K)
AC Power
This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
Fuse
Replacement
1) Disconnect the unit from the power outlet.
2) With a flat head screwdriver, wedge the fuse holder out of its housing
and remove the blown fuse from its holder.
3) Replace the blown fuse with a fuse of the exact same type and rating.
4) Insert the fuse holder back in its place, and reconnect power.
Mounting
Before mounting this product, read the safety notes at the beginning of this
guide and on page 2 of the product’s user manual. Then, follow the
mounting procedure indicated in the Setup chapter of the user manual.
Product
Mounting
Diagram
Floor Mounting
Overhead Mounting
C Clamps (not included)
Safety cable (included)
Omega brackets (included)
Summary of Contents for Q-WASH 360Z-LED
Page 1: ...Quick Reference Guide ...
