Ovation™ E-190WW QRG
EN
3
What Is
Included
Ovation™ E-190WW
Neutrik® powerCON®
power cord
Warranty Card
Quick Reference Guide
AC Power
This product has an auto-ranging power supply that can work with an input
voltage range of 100–240 VAC, 50/60 Hz.
To eliminate unnecessary wear and improve its lifespan, during periods
of non-use completely disconnect the product from power via breaker
or by unplugging it.
Power Linking
You can link up to 4 Ovation™ E-190WW products at 120 VAC or 7 at
230 VAC. Power linking cords can be purchased separately.
AC Plug
Connection
Wire (U.S.)
Wire (Europe)
Screw Color
AC Live
Black
Brown
Yellow/Brass
AC Neutral
White
Blue
Silver
AC Ground
Green/Yellow
Green/Yellow
Green
Replacing the
Fuse
1.
Disconnect this product from power.
2.
Using a Phillips #2 head screwdriver, unscrew the fuse holder cap
from the housing.
3.
Remove blown fuse and replace with a good fuse of the same type and
rating.
4.
Screw the fuse holder cap back in place and reconnect power.
DMX Linking
The Ovation™ E-190WW will work with a DMX controller using a regular
DMX serial connection. A DMX Primer is available from
www.chauvetprofessional.com
.
DMX
Connection
The Ovation™ E-190WW uses a regular DMX data connection for its
DMX personalities:
UNO
,
DOS
, and
STD.P
. See the User Manual to
connect and configure for DMX operation.
Master Control
The Ovation™ E-190WW allows control of other Ovation™
E-190WW products using a regular DMX data connection. See the User
Manual to configure for Master Control operation.
Master/Slave
Connection
The Ovation™ E-190WW uses the DMX data connection for its
Master/Slave mode. See the User Manual to connect and configure for
Master/Slave operation.
