![Chauvet Nexus Aw 7x7 Quick Refence Manual Download Page 5](http://html.mh-extra.com/html/chauvet/nexus-aw-7x7/nexus-aw-7x7_quick-refence-manual_2593119005.webp)
Nexus™ Aw 7x7 QRG
EN
5
Ethernet
Connections
Diagram
Kling-Net Mode
Kling-Net is a network protocol that uses TCP/IP to send DMX over
a network and into the Neutrik® etherCON® connection ports of
the Nexus™ Aw 7x7 panels. Kling-Net works seamlessly with
Kling-Net-supported ArKaos software for configuring and mapping display
devices. For more information, see the User Manual on the Chauvet
website at
http://www.chauvetlighting.com/product-manuals-literature/
.
Art-Net™ Mode
Art-Net™ is an Ethernet protocol that uses TCP/IP to send DMX
signals over a network and into the Neutrik® etherCON® connection
ports of the Nexus™ Aw 7x7 panels. Art-Net™ requires configuration
through the control panel. For more information, see the
Menu Map
in
this QRG or the User Manual on the Chauvet website.
An Art-Net™ Primer is available from
www.chauvetprofessional.com
. Art-
Net™ is designed and copyrighted by Artistic Licence Holdings Ltd.
Nexus™ Aw 7x7 panels do not work with Art-Net™ controllers
sending in Broadcast mode. For information about the controller’s
mode, see the controller’s User Manual.
Reset To
Factory
Defaults
1.
Disconnect the Nexus™ Aw 7x7 from power.
2.
Press and hold
<MENU/ESC>
and
<ENTER>
simultaneously.
3.
Reconnect the Nexus™ Aw 7x7 to power.
4.
Release
<MENU/ESC>
and
<ENTER>
. The words
Factory reset?
ENTER = Confirm
show on the display.
5.
Press
<ENTER>
.
NOTE: Do not use the router WAN port!
Router
Computer or
Controller Running
TCP/IP based
protocol, such as
Kling-Net or Art-Net™
Nexus™ Aw 7x7
Panels
Additional
Nexus™ 7x7
Panels