Setup
NEXT NXT-1 User Manual Rev. 8
-5-
3.
S
ETUP
AC Power
Each NEXT NXT-1 has an auto-ranging power supply that works with an input voltage range of
100 to 240 VAC, 50/60 Hz. To determine the power requirements for each NEXT NXT-1, refer
to the label affixed to the product. You can also refer to the Technical Specifications chart in this
manual.
The listed current rating indicates the maximum current draw during normal operation. For more
information,
download Sizing Circuit Breakers from the Chauvet
website:
•
Always connect this product to a protected circuit with an appropriate electrical
ground to avoid the risk of electrocution or fire.
•
Never connect this product to a rheostat (variable resistor) or dimmer circuit, even if
the rheostat or dimmer channel serves only as a 0 to 100% switch.
•
To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
AC Plug
The NEXT NXT-1 comes with a power input cord terminated with a Neutrik® powerCON® A
connector on one end and an Edison plug on the other end (U.S. market). If the power input
cord that came with your product has no plug, or if you need to change the Edison plug, use the
table below to wire the new plug.
Connection
Wire (U.S.)
Wire (Europe)
Screw Color
AC Live
Black
Brown
Yellow or Brass
AC Neutral
White
Blue
Silver
AC Ground
Green/Yellow
Green/Yellow
Green
Fuse
Replacement
Disconnect this product from the power outlet.
1.
Using a flat-head screwdriver, unscrew the fuse holder cap from the housing.
2.
Remove the blown fuse and replace with another fuse of the same type and rating
3.
(T 5 A, 250 V).
Screw the fuse holder cap back in place and reconnect power.
4.
Make sure to disconnect the product’s power cord before replacing a blown fuse. Always
replace the blown fuse with another of the same type and rating.
Power Linking
The NEXT NXT-1 supports power linking. You can power link up to 5 products at
120 V; up to 9 at 208 V; or up to 10 at 230 V.
This product comes with a power input cord. Power linking cables are available from Chauvet
for purchase.
Power Linking
Diagram
Power
Source
1
st
Product
2
nd
Product 3
rd
Product
Additional Products