Operation
-34-
NEXT NXT-1 User Manual Rev. 8
Test Mode
To run an automatic test of all NEXT NXT-1 functions:
Press
<MENU/ESC>
repeatedly to reach the main level of the display menu.
1.
Use
<UP>
or
<DOWN>
to select
Test Setup
.
2.
Press
<ENTER>
.
3.
Use
<UP>
or
<DOWN>
to select
Auto Test
.
4.
Press
<ENTER>
.
5.
To manually test any function:
Press
<MENU/ESC>
repeatedly to reach the main level of the display menu.
1.
Use
<UP>
or
<DOWN>
to select
Test Setup
.
2.
Press
<ENTER>
.
3.
Use
<UP>
or
<DOWN>
to select
Manual Test
.
4.
Press
<ENTER>
.
5.
Use
<UP>
or
<DOWN>
to select from
Pan
,
Pan Fine
,
Tilt
,
Tilt Fine
,
P/T Speed
,
Dimmer
,
6.
Shutter
,
Red
,
Green
,
Blue
, or
White
.
Press
<ENTER>
.
7.
Use
<UP>
or
<DOWN>
to increase or decrease the value of that function, from
0–255
.
8.
Press
<ENTER>
.
9.
Reset
To restart the product without cycling the power:
Press
<MENU/ESC>
repeatedly to reach the main level of the display menu.
1.
Use
<UP>
or
<DOWN>
to select
Reset Setup
.
2.
Press
<ENTER>
twice.
3.
Factory Reset
To reset the product to factory defaults:
Press
<MENU/ESC>
repeatedly to reach the main level of the display menu.
1.
Use
<UP>
or
<DOWN>
to select
System Setup
.
2.
Press
<ENTER>
.
3.
Use
<UP>
or
<DOWN>
to select
Factory Settings
.
4.
Press
<ENTER>
.
5.
Use
<UP>
or
<DOWN>
to select from
No
(keep current settings) or
Yes
(reset settings).
6.
Press
<ENTER>
.
7.
After a Factory Reset, the NEXT NXT-1 will be set to Only DMX mode, with the 23-channel
personality and a starting address of 1.
System
Information
To view information about the product:
Press
<MENU/ESC>
repeatedly to reach the main level of the display menu.
1.
Use
<UP>
or
<DOWN>
to select
Information
.
2.
Press
<ENTER>
.
3.
Use
<UP>
or
<DOWN>
to select from
4.
•
IP Address
•
Device ID
(unique to each product),
•
Temperature
•
Fixture Time
(the number of hours the product has been powered on),
•
Software Version
(shows the currently installed versions of the software on all three
CPU boards in the product),
or
•
Reset State
(if any function fails during the restart process, it will be shown here.
No
shows that function reset correctly,
Yes
shows a failure. If a
Yes
continues to appear
after restarting the product, contact Chauvet Technical Support).
Press
<ENTER>
.
5.