4-
2. Technical Specification
Power supply
- AC 120V~60Hz
- AC 230/240/250V~50/60Hz
Lamp
- ELC 24V 250W
Beam angle
- Standard 26° focused beam angle.
- Fresnel lens.
Movement
- Pan : 540° in 2.8 second.
- Tilt : 270° in 1.6 second.
Dimmer
- Smooth 0~100% dimmer.
Shutter
- Blackout, and variable strobe speed (1~10 flashes per second).
Color wheel
- Independent color wheel with 11 dichroic filters plus white.
DMX Channels
- Standard DMX512 signal addressing and can be controlled by any universal DMX
controller.
Channel 1 = Pan motion
Channel 2 = Tilt motion
Channel 3 = Dimmer
Channel 4 = Shutter
Channel 5 = Colors
Dimension:
290mm x 330mm x 380mm / 11.4in x 13in x 15in
Weight:
12 kg / 26.4 lb
5.5 DMX512 Connection
The DMX512 is widely used in intelligent lighting control, with a maximum of 512 channels.
1. If you using a controller with 5 pins DMX output, you need to use a 5 to 3 pin adapter-cable.
2. On last unit, the DMX cable has to be terminated with a terminator. Solder a 120 ohm 1/4W
resistor between pin 2(DMX-) and pin 3(DMX+) into a 3-pin XLR-plug and plug it in the
DMX-output of the last unit.
3. Connect the units together in a “daisy chain” by XLR plug from the output of the unit to the
input of the next unit. The cable cannot be branched or split into a “Y” cable. DMX512 is a
very high-speed signal. Inadequate or damaged cables, solder joints or corroded connectors
can easily distort the signal and shut down the system.
4. The DMX output and input connectors are pass-through to maintain the DMX circuit, when
power is disconnected to the unit.
5. Each lighting unit needs to have an address set to receive the data sent by the controller.
The address number is between 0-511 (usually 0 & 1 are equal to 1).
6. The end of the DMX512 system should be terminated to reduce signal errors.
7. 3 pin XLR connectors are more popular than 5 pin XLR.
3 pin XLR: Pin 1: GND, Pin 2: Negative signal (-), Pin 3: Positive signal (+)
5 pin XLR: Pin 1: GND, Pin 2: Negative signal (-), Pin 3: Positive signal (+)
