Chauvet Mini 4 Bar 2.0, User Manual

Page: 8 / 18

Page 8 of 18 Mini 4 Bar™ 2.0 User Manual (Rev. 03)
Mounting
Before mounting this product, read and follow the safety recommendations indicated in
the
Safety Notes section (page 2 of this manual).
Orientation
The Mini 4 Bar™ 2.0 may be mounted in any position; however, make sure adequate
ventilation is provided around the product.
Rigging This product has multiple rigging options. They are as follows:

Floor Standing (using the two mounting/standing brackets)

Hanging (using the two mounting/standing brackets)

Hanging (using the two hanging clamp Mounting points)
Before deciding on a location for this product, always make sure that it will be easy to
access the unit for maintenance and programming purposes.
Make sure that the structure onto which you are mounting this product can support its
weight. Please see the
Technical Specifications section of this manual for weight
information.
When mounting this product overhead, always use a safety cable. Mount the product
securely to a rigging point, whether an elevated platform or a truss. The bracket has a
13 mm hole, which is appropriate for this purpose.
When rigging this product onto a truss, you should use a mounting clamp of appropriate
weight capacity.
When power linking multiple products, you must always consider the length of the power
linking cable and mount the products close enough for the cable to reach.
Mounting Diagram
Tripod stand
adjustment knob
Pod tilt
adjustment (x8)
Pod pan
adjustment (x4)