3. Setup
9
12/7/2010 9:44 AM
3.
S
ETUP
AC Power
This fixture includes an external power supply which is auto-ranging and runs on 100~240 VAC,
50/60 Hz power. Only use the included power supply! To obtain a replacement power supply,
contact Chauvet®.
To determine the power requirements for a particular fixture, see the label affixed to the back
plate of the fixture or refer to the fixture’s specifications chart. A fixture’s listed current rating
indicates its average current draw under normal conditions.
Always connect the fixture to a switched circuit. Never connect the fixture to a rheostat
(variable resistor) or dimmer circuit, even if the rheostat or dimmer channel is used only
as a 0 to 100% switch.
Always connect the fixture to a circuit with a suitable electrical ground.
