Operation
LX Go™ User Manual Rev. 4
-7-
4. Operation
Control Panel
Description
Button
Function
<MENU>
Exits from the current menu or function
<ENTER>
Enables the currently displayed menu or sets the currently
selected value in to the current function
<UP>
Navigates upward through the menu list and increases the
numeric value when in a function
<DOWN>
Navigates downward through the menu list and decreases the
numeric value when in a function
Control Options
You can set the LX Go™ start address in the 001~512 DMX range.
Programming
Refer to the
Menu Map
to understand the menu options. The menu map shows the main
level and a variable number of programming levels for each option.
•
To go to the desired main level, press
<MENU>
repeatedly until the option shows on
the display. Press
<ENTER>
to select. This will take you to the first programming
level for that option.
•
To select an option or value within the current programming level, press
<UP>
or
<DOWN>
until the option shows on the display. Press
<ENTER>
to select. In this
case, if there is another programming level, you will see that first option, or you will
see the selected value.
•
Press
<MENU>
repeatedly to exit to the previous main level.
DMX Personality
This setting allows you to choose a particular DMX personality.
1. Go to the
SETTINGS > PERSON
level.
2. Select the desired personality (
RGB
,
RGBW
, or
RGBWA
).
•
See the
DMX Values
section for the highest starting address you can select for
each personality.
•
Make sure that the starting addresses on the various products do not overlap
due to the new personality setting.
DMX Control
In this mode, each product will respond to a unique starting address from the DMX
controller. All products with the same starting address will respond in unison.
1. Select a DMX personality as shown in DMX Personality.
2. Set the starting address:
a. Go to
SETTINGS > ADDRESS
level.
b. Select the starting address (
001~512
).
DMX CAST
In this mode, the LX Go™ can record up to 12 hours of continuous DMX programming
data from another DMX controller and play it back from the control panel, scheduled
playback mode, or IRC.
DMX Cast Recording
This setting allows you to record up to 12 hours of DMX programming on a single
universe.
1. Go to
Edit > DMXCAST > RECORD PASSWORD
level.
2. Enter the master access password as shown in
Password
.
3. Press
<ENTER>
or move channel 1 on the DMX controller to a value between
011~099, to start recording. “DMXCAST RECEIVING” will be displayed.
4. Press
<ENTER>
again or move channel 1 on the DMX controller to a value between
201~255, to end recording. “DMXCAST STOP” will be displayed.
DMX Cast Playback
1. Go to
PLAY > DMXCAST >
level.
2. Press
<ENTER>
