General Instructions
This lighting effect has been designed to function on a 9V DC power and has been supplied with a
suitable AC power pack for use with your local voltage. Check the label on the unit and the power
plug for the correct voltage. When connected to the mains power supply via the power pack and
switched on the unit should illuminate and shoot a <4.95mW single green laser.
Warning: Do not
aim towards eye.
The Scorpion™ G is ready to be plugged in out of the box. No assembly is required. The Scorpion™
G is a sound-active laser that can function in Stand-alone as well as Master/Slave. The unit is
equipped with 40 built in patterns that cycle in sound-active mode and over 50 patterns in Manual or
Automatic mode.
1. Link In: 3.5mm jack
2. Link Out: 3.5mm jack
AUTO
SPEED
MIC
POWER
M/S
Indicator
DIPSWITCH
SET FUNCTION
Auto Manual
Dipswitch Chart
Function
1
2
0
Master/Auto
0
0
Master/sound
1
1
Slave/Auto
0
1
Slave/sound
1
Switch
Dip
switch
set
ON
OFF
LINK IN
LINK OUT
0= OFF 1= ON
BASED ON DMX VALUES
DC Input
12V 800mA
PATTERN
KNOB
#2
#1
3. DC power input
4. Mode LED Indicator
5. Pattern Rotary Knob # 1
6. Dipswitch 1 & 2
7. Pattern Rotary Knob # 2
8. 2-Way Switch:
(Manual/Automatic)
9. Speed Knob for Automatic Mode
10. Microphone
11. Power Switch
1
2
3
4
5
7
9
10
6
8
11
Mode Setup
Manual Mode
: (8) Turn 2-way switch to the right
Automatic Mode
: (8) Turn 2-way switch to the left
Master/Slave:
works only when in Automatic Mode.
D
IPSWITCH
1 M
ODE
D
IPSWITCH
2 M
ODE
ON Automatic
ON Slave
OFF Sound
Activated
ON Automatic
OFF Master
OFF Sound
Activated
Stand-Alone Mode
The stand-alone mode can run either Sound Activated or Automatically. In Sound Active mode
patterns will change to the beat of the music. In Automatic mode the patterns will change at a steady
and pre-determined interval.
1)
Turn 2-Way Switch to the left for Stand-Alone mode.
Sound Active
1)
Set 2-Way Switch to the left.
2)
Set Dipswitch 2 to the OFF position
LG-20 User Manual
6
11/14/2007/18:10
