Legend™ 4500 User Manual
9
12/10/2008 4:28 PM
Mounting
Orientation
This fixture may be mounted vertically or horizontally.
Rigging
The fixture includes a mounting yoke to which a rigging clamp can be attached.
You must supply your own clamp and make sure the clamp is capable of
supporting the weight of this fixture. It is recommended to use at least 2
mounting points per fixture. You can order “C” and “O”-clamps from any
CHAUVET dealer or distributor (CLP-15, CLP-06 recommended).
If hanging the fixture for over head use, then please follow the below steps.
1. Block access below the work area and use suitable and stable platform
when installing or servicing fixture.
2. Safety cables must always be used, secured
through the safety cable
passageway
. The safety cable must be capable of holding 10 times the
weight of the fixture.
3. Verify the structure can hold 10 times the weight of all to-be installed
fixtures.
Caution!
This fixture must be mounted in a ventilated location, as it is fan/convection
cooled.
Note!
Clamp is sold separately.
Safety cable
Hanging Clamp
