Chauvet LEG-3000, User Manual, Page: 16 / 22

Appendix
LEG-3000 Manual
16
Revision: 2006-01-20/16:03
Self Demonstration & Master/Slave
{

}
–
S e l f - d e m o
This function will execute the built-in program in the fixture.
F
UNCTION
S
ET
T
O
N
OTES
Off Normal

On Run self-demonstration
{
 
}
–
D e m o s p e e d
You can set the pace of the demo to either quick or fast.
F
UNCTION
S
ET
T
O
N
OTES
Off Quick paced

On Slow paced
{

}
–
So u n d - Ac t i v e ( M a s t e r / S l a v e )
In this mode the fixture can be set to run in a sound-activated mode in either a fast or slow pace.
Additionally, slave fixtures can all also be set to synchronize to the first fixture or in this case Master.
Please disconnect from the controller before enabling this function.
Requirements:
In the Legend 3000X the default 16-bit channel mode is required to be set. The Legend 3000X is
controlled using 14 channels.
F
UNCTION
S
ET
T
O
N
OTES
Off Normal
“ Off ”

On
Sound-active slow pace
F
UNCTION
S
ET
T
O
N
OTES
Off Normal
“ Off ”

On Sound-active fast pace
M a s t e r F i x t u r e Se t t i n g s
1.
DMX address Ch 001
2. Set Aud.S or Aud.F to
“ On ”
Sl a v e F i x t u r e Se t t i n g s
In a Master/Slave setup all slave fixtures following the master would be addressed the same. Please
follow the following instructions for all slave fixtures.
Legend 2000X: DMX address Ch 014, Aud.S or Aud.F set to OFF
Legend 3000X: DMX address Ch 015, Aud.S or Aud.F set to OFF
Important!
All Slave fixtures must have
“
Aud.S
”
or
“
Aud.F
”
set to off.
You must set
“
Aud.S
”
and
“
Aud.F
”
to off to regain DMX control of the fixture.