LEDrain™38 User Manual
7
11/28/2007
10:00
AM
O
PERATING
I
NSTRUCTIONS
The LEDrain™38 is a DMX-512 controllable, full RGB color mix par can made up of highly efficient
and bright LEDS measuring 10mm in diameter. All red, green and blue LEDs can be controlled
separately allowing the creation of an unlimited range of colors.
The LEDrain™38 can operate in Stand-Alone, Master/Slave and via DMX-512 control utilizing 6 DMX
channels.
Master/Slave Mode
The Master/Slave mode will allow you to link up to as many units you want in a daisy chain fashion. In
this mode, the first unit in the daisy chain will automatically command all other units following.
1. Connect all LEDrain™38 units in a daisy chain fashion as described in the section following.
2. Dipswitch settings on slave fixtures are not required and will have no affect.
3. Set all dipswitches on the Master unit to the “Off” position and the unit will run it’s built in color
change program.
OPTIONS
- Set Music/Auto switch to Music and for sound-activated triggering of the program
- Set Music/Auto switch to Auto then use the rotary dial to adjust speed of the program
- See below under
Dipswitch Options
for additional program settings
D a i s y C h a i n C o n n e c t i o n
1. Connect the (male) 3 pin connector side of the DMX cable to the output (female) 3 pin connector
of the first fixture.
2. Connect the end of the cable coming from the first fixture which will have a (female) 3 pin
connector to the input connector of the next fixture consisting of a (male) 3 pin connector. Then,
proceed to connect from the output as stated above to the input of the following fixture and so on.
D i p sw i t c h O p t i o n s
F
UNCTIONS
D
IPSWITCHES
(
ON
) N
OTES
&
D
ESCRIPTION
Manual color
1-8
Dipswitches 1-2: Red level (1 on = 50%, 2 on = 75%, 1-2 on = 100%)
Dipswitches 3-4: Green level (1 on = 50%, 2 on = 75%, 1-2 on = 100%)
Dipswitches 5-6: Blue level (1 on = 50%, 2 on = 75%, 1-2 on = 100%)
Music/Auto switch has no function in this mode
Color change program
8
Music/Auto switch
Music: Sound Activated, Rotary knob sets sound sensitivity
Auto: Rotary knob sets speed of program
Very slow color cross-fade
program
9
Music/Auto switch has no function in this mode
