background image

Cleaning

The most important part of your lighting effect to keep clean are the mirrors as they allow the light output to transmit. They
should be cleaned with a soft damp cloth. There is also a single mirror located under the center cap that should also be
cleaned. The body of the unit may also be cleaned in the same way. We recommend internal cleaning be carried out by a fully
qualified technician.

Maintenance & Servicing

Work on internal parts should be carried out by a qualified technician. Removal of covers other than the front to replace lamp or
effect dish, or the fuseholder is considered a breach of warranty and will not be covered under any such agreement unless
authorized first by the company.

Troubleshooting

• If the unit is not functional – check main power supply is ‘on’ and check fuses.
• If the unit is not moving to the music check the sound-activation adjustment (when applicable)
• If after trying this solution you still have a problem contact your dealer or CHAUVET.

Contact Chauvet

USA
Tecnical Assistance: 1-800-762-1084  (954) 929-1115
E-Mail [email protected]

Caution

Do not obstruct the air vents.
Do not touch unit  while hot.
No user serviceable parts inside, please refer to CHAUVET for service.

Unit should be mounted in such a manner that the emitted beam will no strike people.

Power Connections

The unit is supplied with a power plug appropriate to its voltage and destination. Should any other 
connections be required they must be carried out with the following configuration.

Earth = Green/Yellow cable
Neutral = Blue cable
Live = Brown cable

In the USA & Europe, it is required that all plugs are 3-pin type i.e. with Earth/Ground connection.
In the UK, it is required that all mains plugs are fitted with 5A fuses.

Technical Specifications

Power

120V, 60Hz AC

240V, 50Hz Ac

Fuse

20mm Glass 1A Fast Blow

20mm Glass 1A Fast Blow

1 x 4.9mW Green Laser

1 x 4.9mW Green Laser

Diode

Part No. 4.9mW Green

Part No. 4.9mW Green

Dimensions

457 x 101.6 x 101.6mm / 18 x 4 x 4in

457 x 101.6 x 101.6mm / 18 x 4 x 4in

Weight

5 kg / 12.75 lbs

5 kg / 12.75 lbs

Summary of Contents for LAZER SCAN LGG-3100X







Reviews: