Page 12 of 15
JAM™ Pack Emerald User Manual Rev. 1
6.
G
ENERAL
F
OGGER
T
ROUBLESHOOTING
Symptom
Possible Cause
Possible Action
No output or fog machine
is spitting fluid
Incorrect fluid
Clean thoroughly with CHAUVET® FCQ. For full
instructions, see
Fog Machine Maintenance
. Refill
with CHAUVET® water-based fog fluid.
Blocked pipe or failing part
Contact Customer Service
Circuit breaker or fuse
keeps blowing
Excessive load on the circuit
Make sure that the total load does not exceed
80% of the breaker or fuse nominal current
Short circuit along the power
lines
Check the power lines and power cords
Product does not power
up
No energy on power outlet
Check power outlet
Change to another outlet
Loose or damaged power cord
Check the power cord
Blown fuse
Replace blown fuse with a good one of the same
type and rating
Internal problem
Send product for repair
Product stops pumping/
Loud noise
Low/No Fluid
Refill product with fluid
Pump protection system
engaged
Release manual fog button, and press it again to
reset pump protection system
If you still experience problems after trying the solutions presented here, contact
Chauvet Technical Support. See
Contact Us
.
Summary of Contents for JAM Pack Emerald
Page 1: ...User Manual ...
