Intimidator Spot 355 IRC User Manual Rev. 1
Page 11 of 25
Configuration
(DMX)
Set the product in DMX mode to control with a DMX controller.
1. Connect the product to a suitable power outlet.
2. Connect a DMX cable from the DMX output of the DMX controller to the DMX input
socket on the product.
Starting Address
When selecting a starting DMX address, always consider the number of DMX channels
the selected DMX mode uses. If you choose a starting address that is too high, you could
restrict the access to some of the product’s channels.
The Intimidator Spot 355 IRC uses up to 14 DMX channels in its 14-channel DMX mode,
which defines the highest configurable address to
499
.
If you are not familiar with the DMX protocol, download the DMX Primer from
www.chauvetlighting.com
.
To select the starting address, do the following:
1. Press
<MENU>
.
2. Use
<UP>
or
<DOWN>
to choose
Address
.
3. Press
<ENTER>
.
4. Use
<UP>
or
<DOWN>
to select the starting address.
5. Press
<ENTER>
.
DMX
Personalities
The Intimidator Spot 355 IRC has two DMX personalities, a 14-channel personality and
an 8-channel personality.
To choose which DMX personality to use, follow the steps below:
1. Press
<MENU>
.
2. Use
<UP>
or
<DOWN>
to choose
Run Mode
.
3. Press
<ENTER>
.
4. Use
<UP>
or
<DOWN>
to select
DMX
.
5. Press
<ENTER>
.
6. Use
<UP>
or
<DOWN>
until either
14CH
(to choose the 14-channel personality) or
08CH
(to choose the 8-channel personality) shows on the display.
7. Press
<ENTER>
.
Summary of Contents for Intimidator Spot 355 IRC
Page 1: ...User Manual ...
