Hemisphere™ 5 User Manual (Rev. 02c)
Page 11 of 18
Master/Slave Mode
This mode allows a single Hemisphere™ 5 unit (the “master”) to control the actions of
one or more Hemisphere™ 5 units (the “slaves”) without the need of a DMX
controller. The master unit will be set to operate in either Automatic or Sound Active
mode, while the slave units will be set to operate in Slave Mode. Once configured and
connected the slave units will operate in unison with the master unit.
Configure the units as indicated below.
Slave units:
1) Press
<MENU>
repeatedly until
SLAV
shows on the display.
2) Press
<SETUP>
.
Master unit:
1) Set the master unit to operate in either Automatic or Sound mode, as indicated
previously.
2) Make the master unit the first unit in the DMX daisy chain.
•
Configure all the slave units before connecting the master unit to the DMX
daisy chain.
•
Never connect a DMX controller to a DMX string configured for Master/Slave
operation because it may interfere with the signals from the master unit.
Do not connect more than 31 slave units to the master unit.
Summary of Contents for Hemisphere 5
Page 1: ...User Manual ...
