Q-Spot™ 560 LED QRG
Page 5 of 16
AC
Power
This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
Fuse
Replacement
1.
Disconnect this product/product from the power outlet.
2.
Wedge the tip of a flat head screwdriver into the slot of the fuse holder
and pry the safety cap out of the housing, which will pull the installed
fuse.
3.
Remove the blown fuse from the safety cap and replace with a fuse of
the exact same type and rating (T 5 A, 250 V).
4.
Insert the fuse holder back in place, and reconnect power.
DMX
Linking
The Q-Spot™ 560 LED can work with a DMX controller when linked using
a regular DMX serial connection.
If you are not familiar with the DMX standard, please download the
DMX
Primer
document from
www.chauvetpro.com
.
DMX
Connection
The Q-Spot™ 560 LED uses a regular DMX data connection for its DMX
personalities,
Basic
and
Advanced
.
Download the
Q-Spot™ 560 LED User Manual
and refer to the
Setup
chapter to learn how to connect this product for DMX operation, and the
Operation
chapter to learn in detail how to configure this product for DMX
operation.
Master/Slave
Connection
The Q-Spot™ 560 LED uses the DMX data connection for its Master/Slave
mode.
Download the
Q-Spot™ 560 LED User Manual
and refer to the
Setup
chapter to learn how to connect this product for Master/Slave operation, and
the
Operation
chapter to learn in detail how to configure this product for
Master/Slave operation.
Summary of Contents for Green Thinking Q-Spot 560 LED
Page 1: ...Quick Reference Guide ...
