Chauvet GigBar LT, User Manual

Page: 13 / 21

GigBAR LT User Manual Rev. 1 Page 13 of 21
Configuration
(Standalone)
Set the product in one of the standalone modes to control without a DMX controller.
•
Connect the product to a suitable power outlet.
Never connect a product that is operating in any standalone mode to a DMX string
connected to a DMX controller. Products in standalone mode may transmit DMX
signals that could interfere with the DMX signals from the controller.
Auto Mixed
Effects
To run the GigBAR LT in one of the Auto mixed effects, follow the instructions below:
1. Press
<MENU> repeatedly until Aut_ shows on the display.
2. Press <ENTER> .
3. Use <UP> or <DOWN> to select Aut1 or Aut2 .
4. Press <ENTER> . F 01–F 99 will show on the display.
5. Use <UP> or <DOWN> to increase or decrease the program speed.
Sound-Active
Mixed Effects To run the GigBAR LT in one of the Sound-Active mixed effects, do the following:
1. Press
<MENU> repeatedly until Sud_ shows on the display.
2. Press <ENTER> .
3. Use <UP> or <DOWN> to select Sud1 or Sud2 .
4. Press <ENTER> .
5. Turn the Sound Sensitivity Knob up until the product responds to the beat of the
music. See the Product Overview for more information.
The product will only respond to low frequencies of music (bass and drums).
Show Mode
To run the product in Show Mode, follow the instructions below:
1. Press
<MENU> repeatedly until ShoW shows on the display.
2. Press <ENTER> .
3. Use <UP> or <DOWN> to select:
•
AP-- (Auto Pars)
•
AM01 (Auto Moonflowers)
•
AS-- (Auto Strobes)
•
APM- (Auto Pars and Moonflowers)
•
APS1 (Auto Pars and Strobes)
•
AMS1 (Auto Moonflowers and Strobes)
•
SP-- (Sound-Active Pars)
•
SM01 (Sound-Active Moonflowers)
•
SS-- (Sound-Active Strobes)
•
SPM- (Sound-Active Pars and Moonflowers)
•
SPS1 (Sound-Active Pars and Strobes)
or
•
SMS1 (Sound-Active Moonflowers and Strobes)
4. Press <ENTER> .
5. For:
•
AP-- , use <UP> or <DOWN> to select AP01–AP07 .
•
AS-- , use <UP> or <DOWN> to select AS01–AS10 .
•
APM- , use <UP> or <DOWN> to select APM1–APM4 .
•
SP-- , use <UP> or <DOWN> to select SP01–SP07 .
•
SS-- , use <UP> or <DOWN> to select SS01–SS10 .
or
•
SPM- , use <UP> or <DOWN> to select SPM1–SPM4 .
For AM01 , APS1 , or AMS1 , F 01–F 99 will show on the display. Use <UP> or
<DOWN> to increase or decrease the program speed.
6. Press <ENTER> .
7. For AP-- , AS-- , or APM- , F 01–F 99 will show on the display. Use <UP> or
<DOWN> to increase or decrease the program speed.