Geyser P6 QRG
EN
Product Overview
FCQ (Fog Cleaner Quart) was specifically developed by
CHAUVET to clean your Geyser P6 Make sure you use FCQ
regularly to increase the life of your product.
AC Power
This product has fixed-voltage power supply that can work with an
input voltage of either 120 VAC, 50/60 Hz or 230 VAC, 50 Hz.
Fuse
Replacement
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse
holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap
and replace with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
Power In
Fluid Tank
Fuse Holder
Nozzle and LEDs
On/Off Switch
Control Buttons
LED Display
Remote Control
Receiver Port
DMX
In/Out
Fluid Line In
Removable Shield
Summary of Contents for Geyser P6
Page 1: ...Quick Reference Guide ...