Funfetti™ QRG
EN
6
Operation
1.
Fill the main tube with Funfetti™ refills (FRC, FRM, and FRU, sold
separately).
Note: The use of CHAUVET® Funfetti™ refills, specially
manufactured for use with Funfetti™ launchers, is recommended.
The standard tank capacity is: 0.5 lb (0.25 kg) for FRC and FRU;
1 lb (0.45 kg) for FRM.
2.
Plug into a suitable power outlet.
3.
Turn on the Funfetti™ by one of the following:
•
Pressing the
<MENU>
and
<ENTER>
buttons at the same time.
•
Using DMX activation.
•
Pressing the button assigned to
CH-1
on the FC-W wireless remote
control.
Note: To refill the Funfetti™ launcher, turn off the launcher and
add more Funfetti™ refill to the main tube.
Control from the
Display
Press the
<MENU>
and
<ENTER>
buttons at the same time. This will
activate the Funfetti™ blower fan immediately. Press buttons again to shut
off.
•
The display will show d 1 while in this standalone mode.
•
Set your DMX before loading Funfetti™ refills.
•
The fan will blast confetti up to 30 ft (9 m) and run for 25 seconds.
FC-W Wireless
Remote Control
To trigger the Funfetti™ using the FC-W wireless remote control, plug in the
product and do the following:
1. Plug the wireless receiver into the Wireless Remote port on the side of the
Funfetti™.
2. On the wireless transmitter, press the button assigned to
CH-1
(1–4) and
the Funfetti™ fan turns on.
For more information on the FC-W or to download instructions, go to
http://www.chauvetlighting.com/product-manuals-literature/
.
Summary of Contents for Funfetti
Page 1: ...Quick Reference Guide...