Freedom™ Strip Hex-4 QRG
EN
2
About This Guide
The Freedom™ Strip Hex-4 Quick Reference Guide (QRG) has basic product
information such as mounting, menu options, and DMX values. For more
information, download the User Manual from the Chauvet website
http://www.chauvetlighting.com/product-manuals-literature/
.
Disclaimer
The information and specifications contained in this QRG are subject to change
without notice.
Safety Notes
The following Safety Notes include important information about installation, use,
and maintenance.
•
Always connect the product to a grounded circuit.
•
Make sure the power cord is not crimped or damaged.
•
Always disconnect the product from the power source before cleaning it or
replacing the fuse.
•
Never disconnect the product from the power source by pulling or tugging on
the cord.
•
If mounting the product overhead, make sure there is adequate support for the
product’s weight and always secure the product using a safety cable.
•
Make sure there are no flammable materials close to the product when it is
operating.
•
Avoid direct eye exposure to the light source while the product is on.
•
Do not touch the product’s housing when the product is operating because the
housing can be very hot.
•
The product is not intended for permanent installation.
•
The product is for indoor use only. It is rated at IP20.
•
Do not expose the product to rain or moisture.
•
Always connect the product to a power source that is within the voltage range
stated on the label or rear panel of the product.
•
Never connect the product to a dimmer or rheostat.
•
Make sure to replace the fuse with another of the same type and rating.
•
Always install the product in a location with adequate ventilation.
•
Always leave at least 20 in (50 cm) between the product and adjacent
surfaces.
•
Be sure that no ventilation slots on the product’s housing are blocked.
•
Do not operate the product at an ambient temperature higher than
104 °F (40 °C).
•
Never carry the product by the power cord.
•
Always use the mounting bracket to lift the product.
•
If there is a serious operating problem, stop using the product immediately.
•
Never try to repair the product. Repairs carried out by untrained people can
lead to damage or malfunction.
•
To eliminate unnecessary wear and improve its lifespan, during periods of
non-use completely disconnect the product from power via breaker or by
unplugging it.
Contact
•
From outside the U.S., UK, Ireland, or Mexico, contact the distributor of
record to request support or return a product.
•
From inside the U.S., UK, Ireland, or Mexico, use the information in
Contact Us
at the end of this QRG.
Summary of Contents for Freedom Strip HEX-4
Page 1: ...Quick Reference Guide ...
