Page 8 of 48
EZMiN™ Laser FX/RBX User Manual Rev. 3
Laser
Exposure
Warning
LASER LIGHT AVOID DIRECT EYE EXPOSURE
Further guidelines and safety programs for safe use of lasers can be found in the ANSI
Z136.1 Standard “For Safe Use of Lasers”, available from the Laser Institute of America:
www.laserinstitute.org
. Many local governments, corporations, agencies, military, and
others, require all lasers to be used under the guidelines of ANSI Z136.1. Laser Display
guidance can be obtained via the International Laser Display Association:
www.laserist.org
.
Laser Emission Data
EZMiN™ Laser FX
Laser Classification
Class 3R
Green Laser Medium
DPSS Nd:YVO4, 532 nm
Red Laser Medium
LD GaAIAs, 650 nm
Beam Diameter
< 5mm at aperture
Pulse Data
All pulses < 4 Hz (> 0.25 sec)
Divergence (each beam)
< 2 mrad
Divergence (total light)
< 160 degrees
Laser Power of Each
Beam from Aperture*
< 5 mW
EZMiN™ Laser RBX
Laser Classification
Class 3R
Blue Laser Medium
LD InGaN, 450 nm
Red Laser Medium
LD GaAIAs, 650 nm
Beam Diameter
< 5mm at aperture
Pulse Data
All pulses < 4 Hz (> 0.25 sec)
Divergence (each beam)
< 2 mrad
Divergence (total light)
< 160 degrees
Laser Power of Each
Beam from Aperture*
< 5 mW
*As measured under
IEC
measurement conditions for classification.
Laser
Compliance
Statement
This laser product complies with EN/IEC 60825-1 Ed 2, 2007-03, and U.S. FDA/CDRH
FLPPS via the terms of Laser Notice No. 50 dated June 24, 2007. This laser device is
classified 3R. (Class 3R is the international equivalent of U.S. Class IIIa.) No maintenance
is required to keep this product in compliance with laser performance standards.
