Chauvet EVE P-150 UV, User Manual, Page: 11 / 16

Page 9 of 14
EVE P-150 UV User Manual Rev. 1
Operation
Configuration (Standalone)
Set the product in one of the standalone modes to control without a DMX controller.
Automatic Programs
To run the EVE P-150 UV in automatic mode, follow the instructions below:
1. Press <MENU> repeatedly until P-- shows on the display.
2. Press <ENTER> .
3. Use <UP> or <DOWN> to select an automatic program, from P 1–3 .
4. Press <ENTER> .
Auto-Program Speed
To change the auto-program speed on the EVE P-150 UV, do the following:
1. Press <MENU> repeatedly until S-- shows on the display.
2. Use <UP> or <DOWN> to increase or decrease the program speed, from S 1–100 .
3. Press <ENTER> . The product will return to Auto mode.
Sound-Active Mode
To run the EVE P-150 UV in sound-active mode, do the following:
1. Press <MENU> repeatedly until Snd shows on the display.
2. Press <ENTER> .
3. Use <UP> or <DOWN> to select a sound-active program, from Snd1–2 .
4. Press <ENTER> .
Sound Sensitivity
To set the sound sensitivity on the EVE P-150 UV:
1. Press <MENU> repeatedly until SenS shows on the display.
2. Use <UP> or <DOWN> to increase or decrease the program speed, from u 0–100 .
3. Press <ENTER> . The product will return to Sound-Active mode.
Static Mode
To run the EVE P-150 UV in static mode, follow the instructions below:
1. Press <MENU> repeatedly until U-- shows on the display.
2. Press <ENTER> .
3. Use <UP> or <DOWN> to increase or decrease the output, from d 0–255 .
4. Press <ENTER> .
Dimmer Speed Mode
To change dimmer speed on the EVE P-150 UV, follow the instructions below.
1. Press <MENU> repeatedly until dIM shows on the display.
2. Press <ENTER> .
3. Use <UP> or <DOWN> to select:
• dIM1 (fast)
• dIM2 (medium)
• dIM3 (slow)
or
• OFF .
4. Press <ENTER> .
Temperature
To view the current temperature of the EVE P-150 UV in °C, do the following:
1. Press <MENU> repeatedly until teMP shows on the display.
2. Press <ENTER> .
Never connect a product that is operating in any standalone mode to a DMX string
connected to a DMX controller. Products in standalone mode may transmit DMX
signals that could interfere with the DMX signals from the controller.
The product will only respond to low frequencies of music (bass and drums).