Chauvet COLORDASH S-PAR 1, User Manual, Page: 10 / 23

Setup
-6- COLORdash S-Par 1 User Manual Rev. 2
3. Setup
AC Power
Each COLORdash S-Par 1 has an auto-ranging power supply that works with an input voltage
range of 100 to 240 VAC, 50/60 Hz. To determine the power requirements for each
COLORado 1 Solo, refer to the label affixed to the product. You can also refer to the
Technical
Specifications chart in this manual.
The listed current rating indicates the maximum current draw during normal operation. For more
information, you may download Sizing Circuit Breakers from the Chauvet website:
www.chauvetprofessional.com .
•
Always connect this product to a protected circuit with an appropriate electrical
ground to avoid the risk of electrocution or fire.
•
To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
Never connect this product to a rheostat (variable resistor) or dimmer circuit, even if the
rheostat or dimmer channel serves only as a 0 to 100% switch.
AC Plug
The COLORdash S-Par 1 comes comes with a power input cord terminated with a Seetronic
Powerkon A connector on one end and an Edison plug on the other end (U.S. market). If the
power input cord that came with your product has no plug, or if you need to change the Edison
plug, use the table below to wire the new plug.
Connection Wire (U.S.) Wire (Europe) Screw Color
AC Live Black Brown Yellow or Brass
AC Neutral White Blue Silver
AC Ground Green/Yellow Green/Yellow Green
Power Linking
The COLORdash S-Par 1 supports power linking. You can power link up to 24 products at
120 V; up to 40 at 208 V; or up to 45 at 230 V.
This product comes with a power input cord. Power linking cables are available from Chauvet
for purchase.
•
To preserve the IP65 rating and the warranty of this product, Seetronic Powerkon
cables must be used.
•
Insert the attached IP65 rated plugs into the corresponding power/data connections
when not in use.