EN
4
COLORband PiX-M USB QRG Rev. 2
QUICK REFERENCE GUIDE
DMX Linking
The COLORband PiX-M USB can work with a DMX controller. Instructions for connecting and configuring this product for
DMX operation are in the User Manual. If you are not familiar with DMX, download the DMX Primer from
.
Starting Address
To ensure full access to all channels available in each DMX mode, the highest recommended DMX address is
477
.
Master/Slave Connection
The COLORband PiX-M USB uses the DMX data connection for its Master/Slave mode. Information about configuring
the COLORband PiX-M USB for Master/Slave operation is in the User Manual, which is available from the Chauvet
website.
IRC-6 (Infrared Remote Control)
The COLORband PiX-M USB can be operated with the CHAUVET IRC-6. For more information about the IRC-6,
download instructions for the IRC-6 or the COLORband PiX-M USB User Manual from
.
D-Fi USB Connectivity
The COLORband PiX-M USB is able to become a D-Fi wireless receiver/transmitter with the use of the D-Fi USB from
CHAUVET DJ. Simply set the DIP switch D-Fi receiving/transmitting channel, plug it into the USB port then set the
product's DMX Personality and DMX Address. Further instructions for connecting and configuring this product for D-Fi
USB operation are in the User Manual.
WARNING! DO NOT plug anything other than a D-Fi USB into the USB port. Doing so may cause
damage to the product.
Once plugged in, the D-Fi USB will take over the product. Wired DMX, manual display control/
menu buttons and IRC-6 will be unavailable until you unplug the D-Fi USB. The priority levels are:
1. D-Fi USB
2. Wired DMX
3. IRC-6 Remote Control
4. Manual Digital Display/Menu Buttons
Summary of Contents for COLORBAND PIX-M USB
Page 1: ...Quick Reference Guide...