COLORado™ Ridge IP QRG
Page 2 of 8
About this
Guide
The COLORado™ Ridge IP Quick Reference Guide (QRG) only contains
the product’s connection and mounting information as well as the menu
options and the DMX values.
Disclaimer
•
This Quick Reference Guide DOES NOT replace the product’s user
manual, which you can download from the CHAUVET® Web site
(
www.chauvetlighting.com
).
•
You must read ALL the disclaimers and safety notes in this document as
well as those in the product’s user manual before installing, operating,
or maintaining this product.
Safety Notes
•
DO NOT open this fixture unless instructed. It contains no user
serviceable parts.
•
DO NOT look at the light source when this fixture is on.
•
DO NOT touch the fixture when it is operating because it may be hot.
•
DO NOT install or operate this fixture where there is less than 50 cm to
the nearest surface to allow adequate ventilation around it.
•
DO NOT leave any flammable material within 50 cm from this fixture
while operating or connected to the power outlet to minimize the risk of
fire.
•
DO NOT carry this fixture from the head; use the handles instead.
•
DO NOT install this product alone. This fixture weighs 53 lbs (24 kg).
Always ask for help when mounting this product to avoid personal
injuries or damage to the unit.
•
DO NOT mount this fixture overhead without using a safety cable.
•
DO NOT submerge this product (IP66). Regular outdoor operation is
fine.
•
DO NOT operate this fixture if you see damage on the housing, lenses,
or cables. In any of these cases, have the damaged parts replaced by an
authorized technician at once.
•
DO NOT connect this fixture to a dimmer or rheostat.
•
ONLY connect this fixture to a grounded and protected circuit.
What Is
Included
•
One Colorado™ Ridge IP
•
One Edison to Proprietary IP66 Power Input Adapter
•
One Male and Female 3-Pin DMX to Proprietary IP66 Adapter
•
Two Omega Brackets
•
One Safety Cable
•
Warranty Card
•
Quick Reference Guide
All manuals and user guides at all-guides.com