Operation
COLORado™ 2 Tour User Manual Rev. 01e
-10-
December 11, 2009
Programming (Cont.)
DMX Control With ID
Addressing
In this mode, the fixtures with the same DMX starting address will respond to the DMX
controller based on the fixture’s individual ID address setting. If the user selects ID
address “0”, all the fixtures with the same DMX address will respond in unison.
Otherwise, each fixture will follow the control for its particular ID address.
1) Repeat steps
1
,
2
and
3
from
DMX Control Without ID Addressing
.
2) Activate ID Addressing in each fixture:
a) Press
<MENU>
repeatedly until
SET
shows, and press
<ENTER>
to accept.
b) Use
<UP>
or
<DOWN>
to select
ID
, and press
<ENTER>
to accept.
c) Use
<UP>
or
<DOWN>
to select
ON
, and press
<ENTER>
to accept.
d) Press
<MENU>
twice to return to the main level.
Static Color
The Static Color mode allows for permanent RGBW color mixing without a DMX
controller.
1) Press
<MENU>
repeatedly until
STAT
shows, and press
<ENTER>
to accept.
2) Use
<UP>
or
<DOWN>
to select the desired color (
Red
,
Green
,
Blue
, or
White
).
3) Press
<ENTER>
to accept.
4) Use
<UP>
or
<DOWN>
to select the desired color value (
0
~
255
).
5) Press
<ENTER>
to accept.
6) Repeat for the other colors.
7) Use
<UP>
or
<DOWN>
to select
Strob
, and press
<ENTER>
to accept.
8) Use
<UP>
or
<DOWN>
to select the desired frequency (
0
~
20
).
9) Press
<MENU>
twice to return to the main level.
Auto Programs
Auto programs allow for dynamic RGBW color mixing without a DMX controller.
1) Press
<MENU>
repeatedly until
AUTO
shows, and press
<ENTER>
to accept.
2) Use
<UP>
or
<DOWN>
to select the desired auto program (
AT. 01
~
10
or
PR.
01
~
10
).
3) Press
<ENTER>
to accept.
You cannot edit auto programs AT. 01~10. However you can edit PR. 01~10 (see
Edit Customs).
Edit Customs
This setting allows the programming of up to 30 scenes for each of the 10 customizable
programs, including colors and effects.
1) Press
<MENU>
repeatedly until
EDIT
shows, and press
<ENTER>
to accept.
2) Use
<UP>
or
<DOWN>
to select the desired auto program (
PR. 01
~
10
).
3) Press
<ENTER>
to accept.
4) Use
<UP>
or
<DOWN>
to select the desired scene (
SC. 01
~
30
).
5) Press
<ENTER>
to accept.
6) Use
<UP>
or
<DOWN>
to select the desired color or effect (
Red
,
Green
,
Blue
,
White
,
Strobe
,
Time
or
Fade
)
7) Press
<ENTER>
to accept.
8) Repeat for the other colors or effects.
9) Press
<MENU>
to return to the Scene level.
10) Repeat for the other scenes.
11) Press
<MENU>
to return to the main level once done.
