Page 12 of 17
Beamer 8 User Manual Rev. 1
IRC-6 Infrared
Remote
Control
The Beamer 8 is compatible with the IRC-6 infrared remote control from Chauvet. To
activate IR mode, follow the instructions below:
1.
Press
<MENU>
repeatedly until
SEt
shows on the display.
2.
Press
<ENTER>
to accept.
3.
Press
<UP>
or
<DOWN>
to select
on
or
oFF
.
4.
Press
<ENTER>
.
IRC-6 Operation
Automatic Mode
Automatic mode will enable you to run the automatic programs on the product.
To turn on Automatic mode:
1.
Press
<AUTO>
on the IRC-6.
2.
Press any number between
<1>
~
<9>
to choose between the different auto
programs.
To adjust the speed of the automatic program:
1.
Press
<SPEED>
on the IRC-6.
2.
Press
<+>
or
<–>
to increase or decrease the speed of the program.
Sound-Active Mode
Sound-Active mode will enable the product to respond to the music.
To turn on Sound-Active mode:
1.
Press
<SOUND>
on the IRC-6.
2.
Press any number between
<1>
~
<9>
to choose between the different sound
programs.
Manual Color Control
To manually control the RGB:
•
Press
<R>
(red),
<G>
(green), or
<B>
(blue) to choose your color.
Miscellaneous Operation
To black out the lights:
Press
<BLACK OUT>
on the IRC-6.
This will turn off all the lights until the button is pressed again.
NOTE
: The IRC-6 will not respond to any inputs when Black Out is activated. If the
remote does not respond when a button is pressed, try pressing
<BLACK OUT>
. You
may have inadvertently activated Black Out.
Summary of Contents for Beamer 8
Page 1: ...Beamer 8 User Manual ...
