Chauvet 6 spot quad IRC, User Manual

Page: 9 / 21

6SPOT™ Quad IRC User Manual Rev. 1 Page 9 of 21
4. O
PERATION
Control Panel
Operation
To access the control panel functions, use the four buttons located underneath the display.
Please refer to the
Product Overview to see the button locations on the control panel.
Button Function
<MENU>
Press to find an operation mode or to back out of the current menu
option
<UP>
Press to scroll up the list of options or to find a higher value
<DOWN> Press to scroll down the list of options or to find a lower value
<ENTER> Press to activate a menu option or a selected value
Menu Map
Mode Programming Steps Description
DMX Mode
4-CH
d 1–d512
Selects the DMX Personality and the DMX
starting address
10CH
28CH
Static Color Mode C-- C 1–C 15 Selects 1 of 15 static colors
Auto Program Mode P-- P 1–P 10 Selects 1 of 10 auto program
Program Speed S-- S 1–S100 Sets auto program speed (slow to fast)
Sound-Active Mode Snd Selects Sound-Active mode
Sound Sensitivity SenS u 0–u100 Sets the sound sensitivity
Custom Color Mixing
Mode
U--
r 0–r255 Red (0–100%)
g 0–g255 Green (0–100%)
b 0–b255 Blue (0–100%)
w 0–w255 White (0–100%)
Infrared Mode SET
ON
Turns infrared on or off
OFF
DMX Linking
The 6SPOT™ Quad IRC works with a DMX controller. Information about DMX is in the
CHAUVET® DMX Primer,
which is available from the Chauvet website
http://www.chauvetlighting.com/downloads/DMX_Primer_rev05_WO.pdf .
Configuration
(DMX)
Set the product in DMX mode to control with a DMX controller.
1. Connect the product to a suitable power outlet.
2. Connect a DMX cable from the DMX output of the DMX controller to the DMX input
socket on the product.
DMX Personality
and Starting
Address
When selecting a starting DMX address, always consider the number of DMX channels the
selected DMX mode uses. If you choose a starting address that is too high, you could
restrict the access to some of the product’s channels.
The 6SPOT™ Quad IRC uses up to 28 DMX channels, which defines the highest
configurable address to
485 .
If you are not familiar with the DMX protocol, download the DMX Primer from
www.chauvetlighting.com .
To select the starting address, do the following:
1. Press <MENU> repeatedly until 4-CH , 10CH , or 28CH shows on the display.
2. Press <ENTER> when the desired personality is selected, and d 1–d512 will show on
the display.
3. Use <UP> or <DOWN> to select the starting address.
4. Press <ENTER> .