Page 8 of 24
Operation
WELL STX 180 User Manual Rev. 1
4. Operation
Control Panel Operation
Control Options
Set the WELL STX 180 starting address in the 001-512 DMX range. This enables control of up to 11
products in the 67-channel personality.
Programming
Refer to the
to understand the menu options. The menu map shows the main level and a
variable number of programming levels for each option.
•
To go to the desired main level, press
<MENU>
repeatedly until the option shows on the display.
Press
<ENTER>
to select. This will show the first programming level for that option.
•
To select an option or value within the current programming level, press
<UP>
or
<DOWN>
until
the option shows on the display. Press
<ENTER>
to select. This will show either the first option if
there is another programming level, or the selected value.
•
Press
<MENU>
repeatedly to exit to the previous main level.
Control Panel Lock
The setting locks or unlocks the control panel.
1. Go to the
Key Lock
main level.
2. Select
On
(locks control panel) or
Off
(control panel stays unlocked).
Configuration (DMX)
Use DMX configurations to operate the product with a DMX controller.
DMX Personalities
This setting allows the user to choose a particular DMX personality.
1.
Go to the
DMX Personality
main level.
2.
Select the desired personality (
4Ch, 15Ch
,
64Ch
, or
67Ch
).
Starting Address
In this mode, each product will respond to a unique starting address from the DMX controller. All products
with the same starting address will respond in unison.
1.
Go to the
DMX Address
main level.
2.
Set the starting address (
001
–
512
).
The highest recommended starting address for each DMX mode is as follows:
Button
Function
<MENU>
Exits from the current menu or function
<ENTER>
Enables the currently displayed menu or sets the currently selected value in to the current function
<UP>
Navigates upward through the menu list or increases the numeric value when in a function
<DOWN>
Navigates downward through the menu list or decreases the numeric value when in a function
When the control panel lock is activated, the product will prompt for the passcode to
access the menu. To enter the passcode, press:
<UP>
,
<DOWN>
,
<UP>
,
<DOWN>
,
<ENTER>
.
•
See the
section for the highest starting address suggested for each
personality.
•
Make sure that the starting addresses on the various products do not overlap due to
the new personality setting.
DMX Personality
DMX Address
4Ch
509
15Ch
498
64Ch
449
67Ch
446
Summary of Contents for Well STX 180
Page 1: ...USER MANUAL...
