Page 21 of 25
Rogue Outcast 2 Hybrid User Manual Rev. 1
Operation
Torque Measurements
•
Screws inside feet – 15.2 Kgf.cm, 13.2 lgb.in
•
Base screws around outside (not the feet) – 16.3 Kgf.cm, 14.1 lgb.in
•
Base screws in middle – 35.7 Kgf.cm, 31 lgb.in
•
Omega bracket holder – 12.2 Kgf.cm, 10.6 lgb.in
•
Screws around display – 9.1 Kgf.cm, 8 lgb.in
•
Screws around power and data ports – 3.5 Kgf.cm, 3 lgb.in
•
Fuse – 7.1 Kgf.cm, 6.1 lgb.in
•
Center of yoke plate – 15.2 Kgf.cm, 13.2 lgb.in
•
Lamp housing – 15.2 Kgf.cm, 13.2 lgb.in
•
Arm cover screws – 18.3 Kgf.cm, 16 lgb.in
•
Allen Key screws holding in front lens cover – 18.3 Kgf.cm, 16 lgb.in
•
Allen Key screws head covers – 18.3 Kgf.cm, 16 lgb.in
Pressure Test Measurements
•
Method: Positive
•
Test Pressure (kPa): 2.18
•
Test Duration (seconds): 60
•
PASS State leak pressure (kPa): <0.02
