
Page 55 of 60
Operation
Rogue R2X Wash User Manual Rev. 2
LED Power (Legacy Mode)
To adjust the power for each color of LED, so as to match the output to a legacy Rogue Wash product:
1. Go to the
Setup
main level.
2. Select the
LED R POWER
(red),
LED G POWER
(green),
LED B POWER
(blue), or
LED W
POWER
(white) option.
3. Increase or decrease the power of the selected color, from
050–100
.
4. Repeat steps 2 and 3 until the output of the Rogue R2X Wash is identical to the output of the
legacy Rogue Wash product(s).
Color Calibration
To alter the color calibration settings:
1. Go to the
Setup
main level.
2. Select the
Color Calibration
option.
3. Select the calibration mode, from
On
(Uses factory default settings),
Off
(Sets all colors to
maximum output), or
Custom
(To set a custom white balance).
4. If
Custom
was selected, then select which color to edit, from
RED
,
GREEN
, or
BLUE
.
5. Increase or decrease the maximum output level of the selected color, from
100–255
.
White Mode
To turn the White Mode on or off, or edit the balance of the White Mode:
1. Go to the
Setup
main level.
2. Select the
White Mode
option.
3. Select
On
(to calibrate the color temperature to 7500K),
Off
(to sets all colors to maximum output),
or
Custom
(to customize the White Mode).
4. If
Custom
was selected, then select which color to edit, from
RED
,
GREEN
,
BLUE
, or
WHITE
.
5. Increase or decrease the maximum output level of the selected color, from
000–255
.
Reset Function
To reset specific functions or the entire product:
1. Go to the
Setup
main level.
2. Select the
Reset Function
option.
3. Select the functions to reset, from
Pan/Tilt
,
Zoom
, or
All
.
4. Select
NO
(to cancel) or
YES
(to reset the selected functions).
Factory Reset
To reset the product to factory settings:
1. Go to the
Setup
main level.
2. Select the
Factory Set
option.
Test Mode
Auto Test
To have the Rogue R2X Wash automatically test all functions one after the other:
1. Go to the
Run Mode
main level.
2. Select the
Auto Test
option.
Manual Test
To manually test an individual function of the Rogue R2X Wash:
1. Go to the
Run Mode
main level.
2. Select the
Manual Test
option.
3. Select a function to test, from
Pan
,
Tilt
,
Dimmer
,
Shutter
,
Red 1
,
Green 1
,
Blue 1
,
White 1
,
Red 2
,
Green 2
,
Blue 2
,
White 2
,
Red 3
,
Green 3
,
Blue 3
,
White 3
,
Red 4
,
Green 4
,
Blue 4
,
White 4
,
Red 5
,
Green 5
,
Blue 5
,
White 5
, or
Zoom
.
4. Increase or decrease the value of the selected function from
000–255
to test it.
Match each color of the Rogue R2X Wash one at a time with each individual color of the
legacy Rogue Wash product(s). This ensures an equal output and color balance from each
product.
Summary of Contents for ROGUE R2X SPOT
Page 1: ...USER MANUAL ...