
Page 6 of 323
Setup
Maverick MK3 Wash User Manual Rev. 7
Mounting
Before mounting the product, read and follow the safety recommendations indicated in the
For our CHAUVET Professional line of mounting clamps, go to
.
Orientation
Always mount this product in a safe position and ensure that there is adequate room for ventilation,
configuration, and maintenance. The Maverick MK3 Wash can be suspended upright or upside down using
the two Omega brackets included, or it can be placed on it rubber feet on a flat-level surface.
Rigging
Chauvet recommends using the following general guidelines when mounting this product:
•
When selecting an installation location, consider easy access to this product for operation,
programming adjustments, and routine maintenance.
•
The product is not intended for permanent installation.
•
Make sure to mount this product away from any flammable material.
•
Never mount in places where rain, high humidity, extreme temperature changes, or restricted
ventilation may affect the product.
•
If hanging this product, make sure that the mounting location can support the product’s weight. See
the
for the weight-bearing requirements of this product.
•
When hanging this product, always secure to a fastening device using a safety cable. For our
CHAUVET Professional line of safety cables, go to
http://trusst.com/products/
.
•
When mounting the product on the floor, make sure that the product and cables are away from
people and vehicles.
•
Place the Maverick MK3 Wash so that it can move freely without hitting anything or anybody.
•
Leave enough slack on the cables to prevent tension and pull on the plugs.
Mounting diagram
Overhead Mounting
Surface Mounting
Rubber feet (x4)
Mounting clamps
Omega brackets (x2)
Safety cable