manualshive.com logo in svg

Chauvet Professional MAVERICK FORCE S SPOT, User Manual

Share
Download
Chauvet Professional MAVERICK FORCE S SPOT User Manual Download Page 27

Page 23 of 29

Maverick Force s Spot User Manual Rev. 1

Operation

Preset Synchronization

To transfer saved preset options from one Maverick Force s Spot to another:

1. Connect the Maverick Force s Spot products to receive the preset options by a DMX daisy chain.

2. Make the Maverick Force s Spot with the preset options to transfer be the first fixture in the DMX 

daisy chain.

3. Power on all of the products.

4. Set all of the products to a 

Control Mode

 other than 

WDMX

 (i.e., 

DMX

, 

ArtNet

, or 

sACN

).

5. On the Maverick Force s Spot with the preset options, go to the 

Settings

 main level.

6. Select the 

Preset Sync 

option.

7. Select 

NO

 (to cancel) or 

YES

 (to transfer the preset options to the connected products).

USB Update

To enable or disable software update using USB:

1. Go to the 

Settings

 main level.

2. Select the 

USB Update 

option.

3. Select 

NO

 (disables software update through USB) or 

YES

 (enables software update through USB).

Reset Function

To reset specific functions or the entire product:

1. Go to the 

Settings

 main level.

2. Select the 

Reset Function 

option.

3. Select the functions to reset, from 

Pan/Tilt

, 

Iris/Prism

, 

Color/CMY

, 

Gobo/Gobo Rotate

, 

Frost

, or 

All

.

4. Select 

NO

 (to cancel) or 

YES

 (to reset the selected functions).

Factory Reset

To reset the product to factory default settings:

1. Go to the 

Settings

 main level.

2. Select the 

Factory Reset 

option.

3. Select 

NO

 (to cancel) or 

YES

 (to reset the product configuration to default factory settings).

Test Mode

Auto Test

To have the Maverick Force s Spot automatically test all functions one after the other:

1. Go to the 

Test

 main level.

2. Select the 

Auto Test 

option.

Manual Test

To manually test an individual function of the Maverick Force s Spot:

1. Go to the 

Test

 main level.

2. Select the 

Manual Test 

option.

3. Select a function to test. (Available functions are: 

Pan

, 

Pan Fine

, 

Tilt

, 

Tilt Fine

, 

P/T Speed

, 

Dimmer

, 

Dimmer Fine

, 

Shutter

, 

Virtual Shaking

, 

Cyan

, 

Magenta

, 

Yellow

, 

Color

, 

Gobo

, 

Gobo 

Rotate

, 

Gobo Index

, 

Gobo2

, 

Focus

, 

Focus Fine

, 

Focus Auto

, 

Zoom

, 

Zoom Fine

, 

Prism

, 

Prism Rotate

, 

Iris

, 

Frost

, 

CMY Macro

, 

CMY Macro

 

Speed

, and 

Special Function

).

4. Increase or decrease the value of the selected function from 

000–255

 to test it.

•

All menu configurations are transferred except for the IP address.

•

ONLY connect Maverick Force s Spot products for this function!

See the 

USB Software Update

 section for the detailed instructions on how to update the 

Maverick Force s Spot software using the USB flash drive.

Summary of Contents for MAVERICK FORCE S SPOT


































Reviews:

No comments

Brands by name

Popular brands

Load more brands