11
EN
QUICK REFERENCE GUIDE
Ground Support 2 Kit QRG Rev. 4
3. Place the panel attachment arm over the panel attachment screw and move down to secure.
4. Secure the clamp of the panel attachment arm to the ladder truss.
The panel attachment arm is adjustable depending on the type of video panel being attached. If the
attachment arm is connected to the corner mounting position, it will need to be extended to the second
locking level.
When using the corner mounting positions to secure video panels to the Ground Support 2 Kit, only
one slot of the panel attachment arm should be used.
2nd locking level
M12 panel attachment screw
Panel attachment arm
To change the locking
level on the panel
attachment arm, press
in the locking pin with a
finger, and slide the
clamp assembly until
the pin locks at the
desired level.