15
Creating a Modular Design
F4 IP User Manual Rev. 4
Vertical Panel Connection
Use the following instructions to join panels vertically:
1.
Line up the alignment conicals at the top of each panel, and the alignment magnets at the top and
bottom of each panel.
2.
Push male Speego connections into female Speego connections.
3.
Turn the spring knobs 90° clockwise.
4.
Turn the tightening latches 180° clockwise until secure.
Warning! The magnetic attachments are not load-bearing and are intended for
alignment assistance only. Do not release panel until the hanging hardware has
been fully secured.
Summary of Contents for F4IP
Page 1: ...User Manual...
