Page 11 of 31
ÉPIX Drive 2000 IP User Manual Rev. 2
Operation
Start Universe
Each ÉPIX Drive 2000 IP uses 6 consecutive universes in Art-Net™ mode and sACN mode, which are
assigned by setting the starting (lowest-numbered) universe address.
To set the starting universe for either port, do the following:
1.
Navigate to the
Settings
for the desired port.
2.
Use
<UP>
or
<DOWN>
to select
Universe
.
3.
Press
<RIGHT>
.
4.
Use
<UP>
or
<DOWN>
to increase or decrease the lowest consecutive universe for the selected
port, from (Art-Net™)
000–246
, or from (sACN)
001–247
.
5.
Press
<RIGHT>
.
IP Address
For each universe of each port on the ÉPIX Drive 2000 IP, there must be a unique IP address. To set these
IP addresses for either port, follow the instructions below:
1.
Navigate to the
Settings
for the desired port.
2.
Use
<UP>
or
<DOWN>
to select
IP Address
.
3.
Press
<RIGHT>
.
4.
Use
<UP>
or
<DOWN>
to select from
IP Address #1–IP Address #10
.
5.
Press
<RIGHT>
.
6.
Use
<UP>
or
<DOWN>
to increase or decrease the first number in the IP address, from
1–126
.
7.
Press
<RIGHT>
.
8.
Use
<UP>
or
<DOWN>
to increase or decrease the second number, from
0–255
.
9.
Press
<RIGHT>
.
10. Repeat steps 8 and 9 for the third and fourth numbers in the IP address.
DMX Address
To set the starting DMX address for either port of the ÉPIX Drive 2000 IP, do the following:
1.
Navigate to the
Settings
for the desired port.
2.
Use
<UP>
or
<DOWN>
to select
DMX Address
.
3.
Press
<RIGHT>
.
4.
Use
<UP>
or
<DOWN>
to increase or decrease the starting DMX address for the selected port,
from
001–_ _ _
(highest address available determined by the
Control Personality
).
5.
Press
<RIGHT>
.
Auto Address
The ÉPIX Drive 2000 IP addresses connected products with the Auto Address function. To perform an
Auto Address, follow the instructions below:
1.
Press
<LEFT>
repeatedly until
Auto Address
is selected.
2.
Press
<RIGHT>
.
3.
Use
<UP>
or
<DOWN>
to select from
No
(do not perform Auto Address) or
Yes
(perform Auto
Address).
4.
Press
<RIGHT>
.
Summary of Contents for EPIX DRIVE 2000 IP
Page 1: ...User Manual ...