LED Shadow™ QRG
EN
4
AC Power
This product has an auto-ranging power supply that can work with an input
voltage range of 100–240 VAC, 50/60 Hz.
To eliminate unnecessary wear and improve its lifespan, during periods
of non-use completely disconnect the product via breaker or by
unplugging it.
Power Linking
For the maximum number of LED Shadow™ products that you can power
link at each voltage, see the User Manual or the sticker on the product.
Fuse
Replacement
1.
Disconnect the product from power.
2.
Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3.
Pry the safety cap out of the housing.
4.
Remove the blown fuse from the clip on the front of the safety cap and
replace with a fuse of the exact same type and rating.
5.
Re-insert the fuse holder and reconnect power.
Mounting
Before mounting this product, read the
. Make sure
the mounting clamp is capable of supporting the weight of the
product. For our Chauvet
line of mounting clamps, go to
www.chauvetlighting.com/cables-clamps-main.html
There are also two
mounting brackets with keyhole mounting holes for flush wall mounting.
Mounting
Diagram
Flush Mounting
Bracket
Bracket Adjustment Knob
Mounting Bracket
Flush Mounting
to Wall (Drywall
Screws x 4)
Mounting Clamp
(such as the
CLP-15N
from Chauvet)
Safety Cable
(such as
CH-05
from Chauvet)
Summary of Contents for LED Shadow
Page 1: ...Quick Reference Guide ...
