2
EN
QUICK REFERENCE GUIDE
Intimidator Spot 375ZX QRG Rev. 1
To Begin
Unpack your Intimidator Spot 375ZX and make sure you have received all parts in good condition. If the box or contents
appear damaged, notify the carrier immediately, not Chauvet.
AC Power
This product has an auto-ranging power supply that works with an input voltage range of 100 to 240 VAC, 50/60 Hz.
Power Linking
It is possible to link up to 4 Intimidator Spot 375ZX products at 120 V or 8 products at 230 V. Never exceed this number.
Power-linking cords can be purchased separately.
Fuse Replacement
1.
Disconnect the product from power.
2.
Using a flat-head screwdriver, unscrew the fuse holder and pull straight out.
3.
Remove the blown fuse from the holder and replace with a fuse of the exact same type and rating.
4.
Re-insert the fuse holder and reconnect power.
Mounting
Before mounting this product, read the
Mounting Diagram
Control Panel Description
To eliminate wear and improve its lifespan, during periods of non-use completely disconnect the
product from power via breaker or by unplugging it.
Button
Function
<MENU>
Exits from the current menu or function
<UP>
Navigates upwards through the menu list and increases the numeric value when in a function
<DOWN>
Navigates downwards through the menu list and decreases the numeric value when in a function
<ENTER>
Enables the currently displayed menu or sets the currently selected value into the selected function
Safety cable
(such as
CH-05
from
Chauvet)
Mounting clamp
(such as
CLP-15
from Chauvet)
Mounting bracket
Rubber feet for floor mounting
(x4)
