Page 7 of 17
Gobo Zoom 2 User Manual Rev. 1
Operation
Configuration (Standalone)
Set the product in one of the standalone modes to control without a DMX controller.
Static Color Intensity
To adjust the intensity of the static white color in the Gobo Zoom 2, follow the instructions below:
1.
Press
<MENU>
repeatedly until
U--
shows on the display.
2.
Press
<ENTER>
.
3.
Use
<UP>
or
<DOWN>
to increase or decrease the LED intensity from
001–255
.
4.
Press
<ENTER>
.
IRC-6 Infrared Remote Control
The Gobo Zoom 2 is compatible with the IRC-6 infrared remote control from Chauvet. To activate IR mode,
follow the instructions below:
1.
Press
<MENU>
repeatedly until
SEt
shows on the display.
2.
Press
<ENTER>
to accept.
3.
Press
<UP>
or
<DOWN>
to select
on
or
off
.
4.
Press
<ENTER>
.
IRC-6 Operation
Never connect a product that is operating in any standalone mode to a DMX string
connected to a DMX controller. Products in standalone mode may transmit DMX
signals that could interfere with the DMX signals from the controller.
Black Out
To black out the lights:
1.
Press
<BLACK OUT>
on the IRC-6.
This will turn off all the lights until the button is pressed again.
NOTE: The IRC-6 will not respond to any inputs when Black Out is activated. If the
remote does not respond when a button is pressed, try pressing
<BLACK OUT>
.
You may have inadvertently activated Black Out.
LED Intensity
To increase/decrease LED intensity:
1.
Press
<1–9>
on the IRC-6.
Summary of Contents for Gobo Zoom 2
Page 1: ...2 User Manual ...
