3
EN
QUICK REFERENCE GUIDE
D-Fi Hub QRG Rev. 3
AC Power
This product has an auto-ranging power supply that works with an input voltage range of 100 to 240 VAC, 50/60 Hz. It
runs on 9 VDC, 500 mA.
Mounting
Before mounting this product, read the
.
Mounting Diagram
Control Panel Description
Menu Map
To eliminate wear and improve its lifespan, during periods of non-use completely disconnect the
product from power via breaker or by unplugging it.
Button
Function
<MENU>
Selects the menu or exits from the current menu or function
<UP>
Navigates upwards through the menu list and increases the numeric value when in a function
<DOWN>
Navigates downwards through the menu list and decreases the numeric value when in a function
<ENTER>
Enables the currently displayed menu or sets the currently selected value into the selected function
<AUTO SYNC>
Detects the D-Fi signal for synchronization of products
Main Level
Programming Levels
Description
Settings
Receive Manual
CH01–16
Allows selection of a specific D-Fi channel
for receiving signal
Transmit Manual
CH01–16
Allows selection of a specific D-Fi channel
for transmitting signal
Receive Auto
Triggers the D-Fi Hub to auto-select a
channel for receiving signal
Transmit Auto
Triggers the D-Fi Hub to auto-select a
channel for transmitting signal
Mounting clamp
(e.g.,
CLP-15
from Chauvet)
Keyhole mounting holes
Threaded
mounting hole
size M12
Threaded
mounting hole
size M10
Fastener strap loop
Hook and loop fastener strap
Summary of Contents for D-Fi Series
Page 1: ...Quick Reference Guide ...
