ChatterBox FRS X2, Owner'S Manual

Page: 6 / 20

Initial Set-Up
The rechargeable Ni-MH battery comes initially charged from the
factory. We recommend that the battery be pre-conditioned by
allowing it to drain completely before applying an additional
14 hr.
full charge . To reduce the risk of damage to the battery do not use
any other charger except the one supplied with the FRS X2. Please
note the battery should have a full charge before the unit is stored
for a long period of time.
If you use the unit after leaving it unused for a long period of time
or when you feel that the durability of the battery becomes shorter
than before, you can try to restore the battery to the original state
by following the steps outlined below.
1. Discharge the battery completely by leaving the unit on and set-
ting the VOX sensitivity to high (next to a TV or radio or in a
noisy room) until the battery is completely drained.
2. Charge the battery completely.
3. Discharge the battery again by following Step 1.
4. You can try to restore the battery to the original state by repeat-
ing Steps 1 and 2 at least three times.
NOTE: WHEN YOU SPEAK INTO THE MICROPHONE AND
HEAR A CHIME IT IS TIME TO RECHARGE THE BAT-
TERY.
6