manualshive.com logo in svg

Chattanooga Intelect Advanced 2771, User Manual, Page: 20 / 56

Share
Download
Chattanooga Intelect Advanced 2771 User Manual Download Page 20

Intelect® Advanced sEMG and sEMG + Stim Module

17

INSTALLING 

S

EMG MODULE

INSTALLATION & REMOVAL

Position the sEMG Module so that the two 

mounting tabs are inserted into the System 

or Channel 3/4 Electrotherapy Module 

mounting slots.

Position sEMG Module

MOUNTING 

SLOTS

MOUNTING 

TABS

Secure sEMG Module

Push the upper portion of the sEMG 

Module until it snaps and is locked into 

position.

NOTE:

If installing the System to a Therapy System 

Cart, refer to the Therapy System Cart User 

Manual for proper instructions.

If desired, install a Channel 3/4, Battery 

or Laser Module to the System, refer to 

the respective module User Manual for 

installation instructions prior the following 

procedures.

Install and Reinstall Additional Module

Install Rear Access Panel

Insert the Power Cord into the System 

Mains connector. Install the Rear Access 

Panel.

REAR 

ACCESS

PANEL

CONNECT

POWER CORD

Summary of Contents for Intelect Advanced 2771

























































Reviews:

No comments