ARTROMOT ELBOW CPM
J.I.M. Medical, LLC * 1343 E Wisconsin Avenue #112 * Pewaukee, WI 53072
Phone: 866-546-4276 * Website: www.jimmedical.com
degrees.) Release the + or – button when you have positioned the arm at the
desired end-range position.
5.
To change the FLEXION setting, press the EXTENSION/FLEXION button.
An arrow will be pointing to the FLEXION value (number on the right).
You can now change the end range setting for FLEXION.
6.
Press and hold the plus (+) or minus (-) keys to move the arm to the
desired end-range position.
(The number in the middle of the screen
indicates the current position in degrees.) Release the + or – button when
you have positioned the arm at the desired end-range position.
7.
Press the
START
button to record change and exit the programming mode.
8.
Press
START
again to re-synchronize the unit. CPM will go to midrange
and stop.
9.
Press
START
a
third time to resume therapy.
To change PRONATION or SUPINATION: (MOTOR B)
1.
Press
STOP
button to be sure unit is not running.
2.
Press
STOP
button again and hold for 5 seconds until the screen changes to
enter the programming mode.
3.
Press the PRONATION/SUPINATION button.
4.
An arrow will be pointing to the PRONATION value (number on left). You
can now change the end range setting for PRONATION.
5.
Press and hold the plus (+) or minus (-) keys to move the arm to the
desired end-range position.
(The number in the middle of the screen
indicates the current position in degrees.) Release the + or – button when
you have positioned the arm at the desired end-range position.
6.
To change the SUPINATION setting, press the
PRONATION/SUPINATION button. An arrow will be pointing to the
SUPINATION value (number on the right). You can now change the end
range setting for SUPINATION.
7.
Press and hold the plus (+) or minus (-) keys to move the arm to the
desired end-range position.
(The number in the middle of the screen
indicates the current position in degrees.) Release the + or – button when
you have positioned the arm at the desired end-range position.
8.
Press the
START
button to record change and exit the programming mode.
9.
Press
START
again to re-synchronize the unit. CPM will go to midrange
and stop.
10.
Press
START
a
third time to resume therapy.
