9
9
USING THE BELT SYSTEM
7 . To attach the Pelvic Belt to a traction
unit, connect the J Hook (located at the
end of the Anterior/Posterior Belt) to the
Large O Ring (located on the
Circumferential Belt) . Then, connect the
rope from the traction unit to the Small
Sliding O Ring (located on the Anterior/
Posterior Belt) .
1 . Pull the first flap of the Thoracic Belt
across the patient’s body in a diagonal line .
NOTE:
Make sure all edges of the
flap are against the patient’s
body for maximum restraint .
2 . While maintaining tension on the first
flap, wrap the second flap diagonally
over the first flap .
NOTE:
Make sure all edges of the
flap are against the patient’s
body for maximum restraint .
1 . Making sure the blue side is facing up,
attach the Pelvic Belt Extender to the
Pelvic Belt using the fastening strips .
2 . Press the locking flaps firmly to secure
the Pelvic Belt Extender .
ATTACHING THE THORACIC BELT - PRONE POSITION
ATTACHING THE UNIVERSAL PELVIC BELT EXTENDER
