manualshive.com logo in svg

Chattanooga Group TX 4759, User Manual

Share
Download
Chattanooga Group TX 4759 User Manual Download Page 33

TX® Traction 

31

OPERATION

RETRIEVING DATA FROM EXISTING PATIENT DATA CARD

Existing Patient Data Card Use

Insert the Patient Data Card (with the 
gold chip facing up) into Patient Data 
Card port located on the front of the 
traction unit.

The treatment list is located on the 
right side. Press the Up or Down Arrow 
button to select the desired treatment. 
Press the Return Arrow to accept. This 
will show the following information: 
Before and After Treatment Pain 
Information (Pain Map, Pain Scale and 
Pain Type) and Session Notes.

NOTE: 

The box located on the left 

            side of the treatment list is a 
            review of treatment parameters 
            of the selected treatment. 
            The review of the treatment 
            shows the following information: 
            Patient's Name, Date, Start 
            Treatment Time, End Treatment 
            Time, and Treatment Parameters.

Press the Run This Treatment button. 
Press the Start button to begin 
treatment.

Press the Clinical Resources button on 
the front of the traction unit.
Press the Patient Card (Patient's Name) 
button located in the Patient Card 
section of the menu.

NOTE:

 If the Patient Data Card is not 

             inserted, this button is deactivated.

Summary of Contents for TX 4759












































Reviews:

No comments

Brands by name

Popular brands

Load more brands